ShotRock 525 CA is a high- performance dry complex polymer-mineral fine grained additive that is created for shotcrete mix preparation, applied using the dry method. Change the amount of ShotRock 525 CA allows to adjust the setting time, the rebound and thickness in one shotcrete layer pass. Use of ShotRock 525 CA allows to reduce the cement consumption in shotcrete mix preparation.
ShotRock 525 CA is a high- performance dry complex polymer-mineral fine grained additive that is created for shotcrete mix preparation, applied using the dry method. Change the amount of ShotRock 525 CA allows to adjust the setting time, the rebound and thickness in one shotcrete layer pass. Use of ShotRock 525 CA allows to reduce the cement consumption in shotcrete mix preparation.
- Perfectly regulates setting time
- Reduces losses of shotcrete mix
- Has a long-shelf-life
- Allows reduction of cement consumption in the shotcrete mix preparation.
ShotRock 525 CA should be used for applying concrete mix by dry shotcreting and concrete spraying.
Use of ShotRock 525 CA allows for significant reduction of the concrete mixture setting time, increasing the initial strength of concrete spraying, applying substantially thick layer in a single pass.
ShotRock 525 CA is used in shotcrete preparation for:
- Shotcreting in mining;
- Shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces;
- Repairing of building constructions.
The average consumption of ShotRock 525 CA ranges from 6% to 9% of the cement weight. Use of ShotRock 525 CA additive allows to reduce the cement dosage in shotcrete mix preparation at 5-11%. The amount of the dosage will depend on the setting time requirements, the rate of gaining early strength and thickness of the shotcrete layer, which must be applied in one pass. It should be noted that the setting time, early strength and, consequently, the dosage of additives will be affected by the ambient temperature and gauged water, as well as the activity of utilised cement. A significant excess of the recommended dosage may lead to lower final strength at the of 28 days age.
When preparing the shotcrete mix, thorough and uniform mixing of additives must be provided. Use of cement stored for extended period of time may lead to changes in the shotcrete mix's setting time. It is recommended to conduct a pretest to verify setting time and daily strength of those cement types, which are planned to be used in this project.
Avoid ShotRock 525 CA contact with your eyes. If contact occurs - rise with large amount of clean running water and immediately seek medical advice. Use rubber gloves and protective goggles during operation.
Comes in 3-layered paper valve bags with polyethylene liner weighing 25 kg (± 0.5 kg).
Store ShotRock 525CA in sealed bags in dry ventilated place with relative humidity of 60%, temperature from -50 up to +50°C. Storage period in the manufacturer's packaging is 12 months from the date of manufacture.
The provided information is based on our experience and present knowledge. Due to numerous factors (characteristics of cement, aggregates) having effect on the final result, a selection of recipes is required. For more information please contact to a manufacturer's representative.
Решим за Вас задачу по доставке наших товаров
Компания ООО "МСТ" организует поставки материалов и смесей по всему миру: от Южной Америки до Азии. Нам доверяют компании из России, ближнего и дальнего зарубежья. Грузы отправляем автотранспортом, контейнерными поездами, морскими линиями и авиатранспортом. Рассчитаем оптимальный маршрут, проконтролируем скорость доставки.
Производство материалов в соответствии с техническими и технологическими особенностями объекта
Важным направлением деятельности научно-производственной компании «МСТ» является разработка и выпуск новых типов материалов под индивидуальные задачи заказчика, например:
- Выполнение научно-исследовательских работ любой сложности по разработке и внедрению новых материалов на минеральных и полимерных вяжущих;
- Разработка материалов и решений в области крепления горных выработок и повышения эффективности буровзрывных работ;
- Подбор состава смеси и технологии их применения с учетом требований проекта;
- Сопровождение применения разработанных материалов на объектах заказчика.
Для производства продукции для проектов, в которых необходимо разработать индивидуальные решения, свяжитесь с нами:
Чтобы заказать разработку материалов под индивидуальные требования, звоните по телефону 8-800-350-97-93 (звонок по России бесплатный), при международных звонках: +7 3842 777 457
Оформить заказ или заявку на консультацию можно на нашем сайте или по электронной почте info@mst.ru.com
