Dry reinforced mixes for shotcreting and concrete spraying Sulfate Resistant
Protection of concrete structures from corrosion and humidity. Dry reinforced mix for shotcreting and concrete spraying ShotRock 400 Sulfate Resistance is created for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces, which require high corrosive resistance when affected by aggressive environments with high sulfate content, as well as for structures located in alternating water horizons affected by sulfates and alternating multiple freezing, thawing, moistening and drying.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 40 Mpa
Water-resistance of shotcrete ready mix
—
not less than W12
Price: on request
Dry reinforced mix for shotcreting and concrete spraying Sulfate Resistant
Dry reinforced mix for shotcreting and concrete spraying ShotRock 400 Sulfate Resistance is created for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces, which require high corrosive resistance when affected by aggressive environments with high sulfate content, as well as for structures located in alternating water horizons affected by sulfates and alternating multiple freezing, thawing, moistening and drying.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 40 Mpa
Water-resistance of shotcrete ready mix
—
not less than W14
Price: on request
Dry reinforced mixes for shotcreting and concrete spraying Sulfate Resistant
Dry mixes for protection of concrete structures from corrosion.
Dry reinforced mix for shotcreting and concrete spraying ShotRock 400 Sulfate Resistance is created for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces, which require high corrosive resistance when affected by aggressive environments with high sulfate content, as well as for structures located in alternating water horizons affected by sulfates and alternating multiple freezing, thawing, moistening and drying.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 40 Mpa
Water-resistance of shotcrete ready mix
—
not less than W12
Price: on request
