Dry unreinforced mixs for shotcreting and concrete spraying
Dry mix for shotcreting and concrete spraying ShotRock 200 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 20 Mpa
Dry unreinforced mix for shotcreting and concrete spraying
Dry mix for mine workings lining. Dry mix for shotcreting and concrete spraying ShotRock 200 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 20 Mpa
Dry unreinforced mix for shotcreting and concrete spraying
Unreinforced mix for shotcreting in mines. Dry mix for shotcreting and concrete spraying ShotRock 300 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 30 Mpa
Dry unreinforced mixs for shotcreting and concrete spraying
Dry mix for shotcreting and concrete spraying ShotRock 300 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 30 Mpa
Dry unreinforced mix for shotcreting and concrete spraying
Unreinforced mixes for concrete spraying in mines.
Dry mix for shotcreting and concrete spraying ShotRock 400 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 40 Mpa
Dry unreinforced mixs for shotcreting and concrete spraying
Dry mix for shotcreting and concrete spraying ShotRock 400 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 40 Mpa
Dry unreinforced mixs for shotcreting and concrete spraying
Dry mix for shotcreting and concrete spraying ShotRock 500 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 50 Mpa
Dry heat insulating mix for shotcreting and concrete spraying ShotRock
The dry heat-insulating mix for shotcreting and concrete spraying ShotRock 15 Termo
is intended for heat-insulating treatment and strengthening of side walls and roof of mine workings, cement, bricks, stone and other reinforced and non-reinforced surfaces by shotcreting and concrete spraying.
Fraction of aggregate (at the customer's choice)
—
up to 5 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 20 Mpa
Dry heat insulating mix for shotcreting and concrete spraying ShotRock
The dry heat-insulating mix for shotcreting and concrete spraying ShotRock 25 Termo is intended for heat-insulating treatment and strengthening of side walls and roof of mine workings, cement, bricks, stone and other reinforced and non-reinforced surfaces by shotcreting and concrete spraying.
Fraction of aggregate (at the customer's choice)
—
up to 5 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 15 Mpa
Dry unreinforced mix for shotcreting and concrete spraying
Dry mix to repair engineering structures, concrete spraying lining, shotcrete lining, mine workings lining. Dry mix for shotcreting and concrete spraying ShotRock 500 is created for shotcreting and concrete spraying in mining, as well as for shotcreting and concrete spraying of cement, bricks, stone and other reinforced and non-reinforced surfaces. In addition, it is also used for repair in building construction.
Fraction of aggregate (at the customer's choice)
—
up to 0.7 mm; up to 3.2 mm
Temperature of working surface
—
from +5ºС to +30ºС
Compression resistance after 28 day storage
—
not less than 50 Mpa
